This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)
$578.99 - $1,444.99
When you're in it to win it, you need Profile Design's Aeria Wing Aero Bars! Designed for maximum aerodynamics, amazing adjustability and superior handling, this beautiful front end sets a new standard. For the ideal blend of power, control and aerodynamics it boasts Profile's high-modulus carbon wing base bar with ergonomic grips, stackable risers for fine-tuning armrest and extension height, their F25 armrests that can be rotated and moved fore/aft, and their T2+ carbon extensions that also are fully adjustable. This all means that you can dial in the ultimate fit to fly down the road and change it as you get stronger, more flexible and even faster! Plus, the carbon construction means lightness and stiffness for excellent support and handling when you're hammering along setting a new PR. And, to make your bike cheat the wind even more you also get multiple drillings for internal cable routing and electronic Di2 compatibility.
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
Zipp's Vuka Shift AXS 90 is more than an aero extension; it's a complete shifting system. Think of it as a supremely efficient solution to house the brains of your SRAM RED or Force eTap AXS time trial or triathlon bike. The Vuka Shift AXS 90 cleanly houses your aerobar extensions, shift-control, and head unit in one neat and clean package. This approach solves an emerging problem of the age of electronic shifting. The time for system integration is now—with this seamless solution. The extensions themselves feature the pro-proven Vuka Evo shape with a 90mm rise. The Vuka Shift AXS 90 is compatible with more than 90 percent of the integrated aerobar systems currently on the market. - AXS Integrated Aerobar shifting system - Length is trimmable, 10mm at front and 90mm at rear - Integrated Garmin/Wahoo/Bryton computer mount - Ships with SRAM Clics extension-end shifters and Blips shifting buttons for brake-lever position shifting - More than an aero extension, this is an integrated shifting system for the modern triathlon/TT bike - Cleans up your aero cockpit for simplicity and optimized aero efficiency
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
The extremely low weight and excellent stiffness of Look's ADH Road Bar make it a favorite among cyclists looking to build their dream bike. Its monocoque construction combines the weight savings, vibration damping, and awesome strength of carbon with Look's comfortable anatomic bend for the ultimate handlebar. The compact drop provides all-day comfort and superb ergonomics. And, this great bar features internal routing for mechanical or electric cables, which keeps your whip clean and aero.
Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
The Aeria Evo AL is an update of our proven Aeria bar. We have evolved the fit range of the bar with New Evo brackets, Ergo armrest and 35a extensions. The new brackets add the ability to tilt the entire assembly, as well as letting the armrest go much narrower than the first generation design. The new Ergo armrest increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. Specifications: - Base Bar: Aeria Aluminum UCI Compliant 3:1, aerodynamic 6061-T6 Hydroformed aluminum wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control. - Bracket: Evo The Evo bracket allows you to upgrade an existing Aeria bar with a massively increased fit range as well as builtin tilt. It is compatible with the existing spacer kit and armrests. - Armrest: Ergo Ergo is the core of our new family of fi t and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The pads are available in two thicknesses - 5mm and 10mm - allowing riders to tune the fit and feel to their own preference. The Ergo is compatible with all current aerobars and earlier models that used the F19, F22, F35 and F40 armrests. - Extension: 35a The new range of extensions has evolved from our well proven T-Series. They have been designed to offer distinct fi t options. We have also adopted a new naming system where by the name gives the angle and material of the extension. Thus the 35a is a 35° bend in aluminum. The 35a extensions offer a 35deg ski bend shape. They are 400mm long to allow a wide range of riders to fit. The cable routing is designed to exit from the rear of the extension. - Basebar Width: 42cm (Center-to-Center) - Basebar: 6061-T6 aluminum - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments): Risers / Bolts sold separately - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 400mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 1012g
$529.99 - $549.99
Covering huge distances? With its unique shape, FSA's K-Wing Compact handlebar could be just the bar you’re looking for. The drops are the same shape as FSA's other compact bars, but the K-Wing features an Aero-Ergo flat top section that rises from the stem clamp. It’s also slightly swept back, resulting in a shape that follows the natural arc of your arms for enhanced comfort. Also, each width of bar has a proportionally sized top diameter. The carbon/Kevlar composite construction includes internal cable routes that are large enough to handle electronic shift connectors. Due to the outward angle of the drops, FSA road handlebars will be narrower in the brake hoods than the drops. - Weight: 250g - Bar Drop: 125mm - Drop Bend Style: Compact - Bar Reach: 80mm - Material: Carbon - Bar Top Style: Flat - Accessory Mount Diameter: 31.8mm
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
The Aeroflux is the ultimate combination of performance and comfort on the road. The newly developed wing shape creates less drag, while the internal cables exit the wing at an angle to ensure they lie tightly next to your stem. For ultimate comfort, the Aeroflux uses our most comfortable drop design, taken directly from the Superergo bars. Drop Grip: The gradual change in curvature makes the grips comfortable for hands of all sizes. The tighter top bend ensures the newest Shimano, SRAM, and Campagnolo shift/brake levers align perfectly for a very comfortable hand position on the hoods. Center Wing: The Aeroflux aero wing cross-section reduces drag where it matters most—at the front of your bike where the airflow is still undisturbed—and it integrates nicely with the 3T APTO stem. Comfort Everywhere: The wing is not only aerodynamic, but it's also comfortable. The increased surface spreads the pressure across your hands and is especially suitable if you rest your thumb on top instead of wrapping it around the bars. - Unidirectional carbon—ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible (this would require a longer round center section and increase aero drag) - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Designed for gravel racing and fast all-road riding, the Aeroghiaia combines speed, control, and comfort. The speed comes from our aero profile, finally giving you road-bike speed on all possible terrain. Control is enhanced thanks to the flared drops, but the key benefit of the Aeroghiaia is comfort. The aero wing shape provides a large surface for your hands to spread the load, while the multi-angle drops keep the brake hoods vertical (instead of weirdly-angled on regular flares) for comfort. Multi Flare: The Aeroghiaia combines our award-winning Superego grip with a multi-angled flare. The top section of the drop is standard so the hoods are angled as intended, while the lower section has an extreme flare for optimal control. Center Wing: The wing's cross-section is aerodynamic yet comfortable, in particular, when you rest your thumb on top of the bars parallel to your index finger. - Unidirectional carbon—-ultralight layup - Internal cable channels - Stem torque, 4-bolt: 6Nm max. - Stem torque, 2 bolt: 8Nm max. - Shift/brake lever torque: 8Nm max. - Clip-ons: Not compatible (this would require a longer round center section and increase aero drag) - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Superleggera, the lightest 3T drop bar, ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty
The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
Light weight, comfort, and strength: The SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo improves upon the flat bar top shape of its carbon predecessor, the Contour SL bar, but also with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128 drop. The short 70mm reach allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. The SL-70 Ergo weighs only 205g but is strong and durable enough for the demands of aggressive cyclocross and gravel racing. - Unidirectional Carbon built for stiffness, comfort and light weight - Ergonomic top for all-day comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - 70mm reach - 128mm drop - Variable radius drop - Cable grooves
Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty
Zipp's Vuka Bull base bar is the perfect starting point for triathletes and time trial specialists building a high-tech aero cockpit. It's packed with innovations for fit, function, and speed. For aerodynamic efficiency, the carbon Vuka Bull utilizes the watt-saving wing-shape of Zipp's SL-70 Aero bar. Its design also is based on feedback from professional bike fitters, so athletes can maintain optimal aero position. The Vuka Bull is designed to be wide enough to help you control your bike in corners and climb comfortably but narrow enough to not slow you down when you are in the aerobars focusing on fast. The clamping area is wide enough to allow a wide range of armrest positions using the Zipp Vuka Clip. The Vuka Bull features a flip design that gives it a rise or drop, allowing you to have your hands where you need them. This available rise provides athletes with the option to keep the base bar as low as possible while still being able to raise the armrests and extensions where they need to be. Also, a slightly higher hand position can help athletes climb steeper grades. The Vuka Bull is designed with Zipp's Rapid Route technology, now with the ability to move control cables, hoses, and wires through the stem clamp area, making it compatible with modern integrated cockpit systems. - Wide enough for control—narrow enough to keep you aero - Designed to allow you to find your fastest position - Aerodynamic wing shape designed using the CFD-proven wing shape from the SL-70 Aero - Rapid Routing cable exits are positioned for easy installation of brake cables, now with routing through the stem clamp area - Updated Zipp cosmetics that scream speed: matte carbon with gloss black logo
$319.99 - $334.99
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions
$207.99 - $270.99
Stiff. Precise. Wide. Camo. The genius of good design manifests itself nicely in camo. Demure. Yet bold. For our latest CoLab, we tapped into the brain trust that is Troy Lee Designs. We handled the intel on the bar specs with our famous Descendant geometry, built from input from our best riders, and Troy handled the finishing touches. His dream: hi-tech camo. Fit to be seen. Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Aluminum, Carbon - Rise (HB): 20mm - Application (HB): Freeride/Downhill - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks
$249.99 - $264.99
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm, 800mm - Material (HB): Carbon - Rise (HB: 25mm - Type (bar): Riser - Upsweep (degree): 5
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
Page 1 of 5 Next page