Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

DT Swiss CRC 1100 SPLINE 38 T Rear
$2,399.99
The pinnacle of the Cross Road category — the CRC 1100 SPLINE 38 T. A wheelset made for all those cyclocross enthusiasts out there racing every weekend from October until February. The cyclocross-specific carbon tubular rim, laced to a straight-pull 240s-based hub with SINC Ceramic bearings, combines superb performance with maximum reliability for harsh off-road use. Being extremely lightweight and reactive, the CRC 1100 SPLINE 38 T will make fast accelerations and jumping over obstacles even more fun than before.
Zipp 202 NSW Carbon Clincher Tubeless Cognition Disc-Brake Rear Wheel
$2,399.00
Engineered to be the fastest accelerating carbon clincher Zipp has ever made, the 202 NSW Carbon Clincher Tubeless Disc-brake flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, we built 202 NSW to deliver the lowest aerodynamic drag available for a tubeless rim of this depth for speed everywhere else. - Superior modulation and stopping power of disc brakes - 202 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Rear Wheel
$2,399.00
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Rim-Brake Rear Wheel
$2,399.00
The Zipp 404 NSW Carbon Clincher Tubeless Rim-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as our Cognition hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - 58mm rim profile, tubeless compatible for increased speed and better cornering, control and comfort - Cognition hubset with Axial Clutch technology provides reduced drag when coasting - ImPress graphics technology prints graphics directly onto the rim, for better airflow management, light weight, and durability - ABLC Sawtooth dimple design helps manage air flow around the rim and contributes to a faster, more stable wheel - Industry-leading Showstopper brake track: powerful and consistent braking, even on the wet - ISO 4210 compliant. See Declaration of Conformity for details
Zipp 454 NSW Carbon Clincher Rim-Brake Front Wheel
$2,399.00
The 454 NSW delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels. Its undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition hubset - ImPress graphics - HexFin ABLC dimple pattern - Showstopper brake track - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 202 NSW Carbon Clincher Wheels
$1,799.00 - $2,349.00
When Zipp gave their top engineers in The Nest advanced development lab the task of shedding more weight from their lightest carbon clincher wheelset, the 202 Firecrest, while also improving rolling friction, aerodynamics, and braking, it was a very tall order. When they asked them to do all of this without sacrificing durability, it looked like an impossibility. But the NSW advanced development team delivered on every request and built the ultimate climbing wheelset, a climbing wheelset strong enough to use on every ride. Engineered to be the fastest accelerating carbon clincher Zipp has ever made, 202 NSW flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, they built the 202 NSW to deliver the lowest aerodynamic drag available for a rim of this depth for speed everywhere else. In order for a climbing wheelset to be world beating it has to do more than simply deliver low weight; it has to deliver uncompromising performance on every level. This is why Zipp engineers in The Nest chose to enhance the world’s fastest climbing carbon clincher, the 202 Firecrest. With a new lighter carbon fiber layup for the 32mm deep 202 NSW, they’ve dropped weight where it matters most, at the outer edge of the wheel, while maintaining the durability and lateral stiffness that Firecrest is famous for. Then they reduced aerodynamic drag with ABLC Sawtooth technology and used ImPress graphics to ensure that nothing stood between the air flowing over the rim and the dimples made to smooth that flow. Knowing that there is no benefit to a wheelset that climbs fast and descends slow, NSW engineers incorporated their Showstopper brake track for the most confidence inspiring rim braking performance available, whether the road is wet or dry. To further improve the wheelset’s rolling efficiency, the 202 NSW rim is laced to their groundbreaking Cognition hubset. Built around their Axial Clutch freehub technology, the Cognition rear hub is engineered to maintain speed when coasting by disengaging the ratchet mechanism. This technology enables the Cognition rear hub to deliver far less rolling friction than wheels using conventional freehubs—a real advantage when fighting through rolling foothills or when spun out on long descents. Engineered for speed when approaching, ascending, traversing, and descending the world’s toughest mountain roads, the Zipp 202 NSW is a wheelset that can only come from one place, The Nest, where the world’s fastest wheels are made.
DT Swiss XRC 1200 SPLINE 30 Rear
$2,299.99
When you pair the latest ultra-light DT Swiss Ratchet System hubs with an XC-tuned 30mm internal-width carbon rim, you get a precision tool for XC domination. Its 28 bladed, high-end DT Swiss spokes and master wheel builder quality make the XRC 1200 SPLINE 30 extremely capable over gnarly roots and rocks, up climbs and down descents, all while more than light enough to gain an edge attacking out of tight switchbacks. - SRAM XD MTB cassette-compatible
DT Swiss EXC 1200 SPLINE 30 Rear
$2,199.99
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 30 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs.
DT Swiss EXC 1200 SPLINE 35 Rear
$2,199.99
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 35 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs. - SRAM XD MTB cassette-compatible
DT Swiss XMC 1200 SPLINE 30 27.5-inch Rear
$2,199.99
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
DT Swiss XMC 1200 SPLINE 30 29-inch Rear
$2,199.99
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
DT Swiss XRC 1200 SPLINE 25 Rear
$2,199.99
Featuring the new generation Ratchet System hubs that are lighter and faster than ever before, along with bladed spokes and the superb wheel build quality and reliability you expect from DT Swiss, the XRC 1200 SPLINE 25 is a race-bred trail machine that loves to go fast. It accelerates like nothing else, tracks like nothing else, and is reliable like nothing else. It is the benchmark for high speeds on any trail, on any gravel road, and in any race — whether that race takes place between the tape or in your head. - SRAM XD MTB cassette-compatible
Zipp 808 NSW Carbon Tubeless Disc Brake Front
$2,199.00
Zipp's 808 NSW Tubeless Disc-brake wheelset features a rim shape that aerodynamically integrates wider tubeless tires for high-performance road cycling at our deepest rim depth, 82mm. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. Also, you get the wider tire options and increased stopping power of disc brakes. The 808 NSW Tubeless Disc brake wheels are optimized for smoother pavement and are aerodynamically optimized for 25mm tires. By extending our patented ABLC Sawtooth dimples all the way to the rim's edge on each of the wheels, NSW disc brake rims deliver higher frequency wind vortex shedding for best-in-class crosswind stability. - An all-out aero 82mm rim profile that's tubeless ready for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 808 NSW Carbon Tubeless Rim Brake Front
$2,199.00
Zipp's 808 NSW Tubeless rim-brake wheelset features a rim shape that aerodynamically integrates wider tubeless tires for a new era of high-performance road cycling at our deepest rim depth, 82mm. The 808 NSW Tubeless allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. The 808 NSW Tubeless's 19mm internal rim width and corresponding outer rim shape are optimized for aerodynamic advantage with 25mm tires. - An all-out aero 82mm rim profile that's tubeless ready for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - New graphics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Ships with QR end caps and quick release skewers
Zipp 808 Firecrest Carbon Tubeless Disc Brake Rear
$2,149.00
Zipp's 808 Firecrest Tubeless Disc-wheelset is pure engineering science. It has to be. To achieve speed with an 82mm rim depth is one thing, but to be fast while offering high crosswind stability, well, that requires serious attention to detail. Yet that's just what the 808 Firecrest Disc brake accomplishes—speed with stability along with tubeless compatibility. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance, without the risk of pinch flats. You also get the greater stopping power of disc brakes. This wheelset is infused with technologies developed in Zipp's Indianapolis advanced development lab: Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. Additionally, at the center of the 808 Firecrest Tubeless Disc-brake is a versatile and durable new hubset, the German-engineered ZR1 DB. - An all-out aero 82mm rim profile that's tubeless-ready for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Superior modulation and stopping power of disc brakes - Center Lock rotor interface (lockring included) - New Zipp graphics and cosmetic identity that scream speed - Ships with 12mm end caps
DT Swiss ERC 1400 Spline 47
$1,489.99 - $2,069.99
Our benchmark setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28 mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25 mm rubber, the ERC 1400 SPLINE with will aero optimize your race bike, ready for you to set your own, new benchmarks.
DT Swiss PRC 1400 Spline 35 Disc
$1,489.99 - $2,069.99
Unsure what will happen on your group ride? Mountains, hills, or flats? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. High-end, bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, these wide and stiff full carbon rims accelerate with the best of them.
DT Swiss PRC 1400 Spline 35 Non-disc
$1,489.99 - $2,069.99
Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.
Zipp 202 NSW Carbon Tubeless Front
$1,999.00
Zipp's 202 NSW Tubeless Disc-brake wheels packs a heavy load of performance into a light and nimble package. This wheel flies up the toughest climbs, shaves time off descents, and handles deftly off pavement. For aero performance, Zipp's ABLC Sawtooth dimple design extends to the rim's edge. The 202 NSW Tubeless Disc-brake is optimized for wide tires with lower tire pressure to meet the performance needs of modern riders in search of low rolling resistance and high compliance. With an internal width of 21mm, these wheels are well suited for rough roads, testing fastest with a 28mm tire in the majority of wind angles. - Tubeless design provides secure performance when ridden at lower tire pressures - New Zipp graphics and cosmetic identity that scream speed, applied using Zipp's ImPress direct-print technology - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 303 Firecrest Tubular Disc Brake Rear
$1,999.00
Zipp's 303 Firecrest Tubular Disc-brake wheels offer game-changing innovations for performance-minded cyclists. These wheels were developed to meet the needs of our sponsored professional road and cyclocross racers as well as any cyclist who prefer the time-proven ride qualities of tubulars. The 303 Firecrest Tubular features our ABLC Sawtooth dimple design which extends all the way to the edge of the rim. The rim features construction upgrades that deliver improved impact resistance. These innovations enhance a wheelset that's excelled in two of pro cycling's harshest proving grounds, the Spring Classics and the Cyclocross World Cup. At the center of the 303 Firecrest Tubular is a versatile and durable new hubset, the German-engineered ZR1 DB. - Go-anywhere 45mm rim depth tubular pro proven in Spring Classics and Cyclocross World Cup - New ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Center Lock rotor interface (lockring included) - New Zipp graphics and cosmetic identity that scream speed - Ships with 12mm end caps
Zipp 303 NSW Carbon Tubeless Rim Brake Front
$1,999.00
The 45mm deep 303 NSW is built for a singular purpose: to be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides, Gran Fondos, and wandering adventures. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world's fastest riders. The 303 NSW Tubeless features a 19mm internal rim width and corresponding outer rim shape for aerodynamic optimization with 25mm tires. This wheel allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ShowStopper textured brake track delivers the best modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed. Applied using Zipp's ImPress direct-print technology - Ships with QR end caps and quick release skewers
Zipp 404 NSW Carbon Tubeless Disc Brake Front
$1,999.00
The Zipp 404 NSW Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the Cognition disc-brake hubset for increased durability and less drag. This wheel, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance while retaining compatibility with tubeless and traditional clinchers. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 404 NSW Carbon Tubeless Rim Brake Front
$1,999.00
No matter where you ride, the 404 NSW Carbon Clincher Tubeless rim-brake wheelset is engineered to make your ride faster. With a rim depth of 58mm, the 404 NSW is designed as a do-everything wheelset that is adept at climbing and maintaining speed on the flats; a wheel strong enough to handle the Spring Classics, but light enough to inspire sprints out of corners. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The 404 NSW Tubeless's 19mm internal rim width and corresponding outer rim shape are optimized for aerodynamic optimization with 25mm tires. This wheelset allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - New graphics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Ships with QR end caps and quick release skewers
Zipp 808 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,999.00
There’s nothing middle of the road about the 808 Firecrest. At 82mm deep, it’s all out aero. Thanks to refinements to Zipp’s revolutionary Firecrest rim shape to be tubeless compatible and optimized for wider tires, the 808 Firecrest Carbon Clincher Tubeless Disc brake is ideal for the new era of disc brake road riding and racing. Without the constraints of rim brake caliper compatibility or brake-track requirements, the Firecrest Carbon Clincher Tubeless Disc-brake wheels offer the increased stopping power and modulation of disc brakes and a whole lot more. To maximize the aero performance of the wheels, Zipp’s ABLC dimples extend all the way to the outer edge of the disc-specific rims. The wheels are also optimized for wider tires to meet the performance needs of modern riders in search of low rolling resistance and aero efficiency with high comfort. The deeper Firecrest Tubeless Disc brake has an internal width of 19mm and are aerodynamically optimized for 25mm wide tires. This design improves Firecrest’s ability to yield low aerodynamic drag and high crosswind stability, a combination called AeroBalance. Designed to be tubeless compatible, the wheels feature a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance even when ridden at lower tire pressures. Zipp’s low rolling resistance and high grip Tangente RT28 and RT25 Road Tubeless tires pair well with the Firecrest disc brake wheels. A new carbon fiber layup for the Indianapolis-made rims keeps weight low while maintaining the Firecrest Carbon Clincher’s proven durability. The robust 77D/177D hubset, paired with 24 Sapim CX-Sprint spokes front and rear, keeps the wheels stiff and responsive. To ensure compatibility with any bike, the versatile 77D/177D hubs come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x142mm rear thru-axles. The 177D rear hub is also XDR driver body compatible for use with SRAM 10-42 cassettes. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
DT Swiss CRC 1400 SPLINE 24 Rear
$1,975.99
The CRC 1400 SPLINE 24 — a wheelset for all those challenges off the beaten track. Whether you are competing in cyclocross races, gravel adventures, or simply the prestigious CX-lunch ride with your colleagues, these wheels will bring a smile to your face. The full carbon tubeless ready rim, laced to a straight pull 240s-based hub, combines superb performance with maximum reliability for harsh off-road use. The CRC 1400 SPLINE 24 and a set of extra-wide tubeless tires, will deliver the ideal combination of light weight, comfort, and grip while you discover new adventures.
DT Swiss GRC 1400 SPLINE 42 650B Rear
$1,975.99
Introducing the Gravel racing king — GRC 1400 SPLINE 42, the most sophisticated gravel wheelset on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheelset. Aerodynamic efficiency for sustainable speed and endurance, ideal support of wide gravel tires for unprecedented comfort and traction off-road, as well as remarkable durability make this wheelset the perfect companion for your next gravel adventure. - Shimano/SRAM 11s road cassette-compatible
DT Swiss GRC 1400 SPLINE 42 700c Rear
$1,975.99
Introducing the Gravel racing king — GRC 1400 SPLINE 42, the most sophisticated gravel wheelset on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheelset. Aerodynamic efficiency for sustainable speed and endurance, ideal support of wide gravel tires for unprecedented comfort and traction off-road, as well as remarkable durability make this wheelset the perfect companion for your next gravel adventure. - Shimano/SRAM 11-speed road cassette-compatible
DT Swiss PRC 1400 Spline 35 Rear Rim Brake
$1,975.99
Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.
Zipp 202 Firecrest Carbon Tubeless Rear
$1,928.00 - $1,949.00
Zipp 202 Firecrest Tubeless Disc-brake wheels harness high technology for high adventure. These wheels are tubeless-ready for road riding that doesn't always stay on smooth pavement. The Zipp 202 Firecrest Tubeless retains its 32mm rim depth for a classic feel with real aero benefits. The wheel's 21mm internal width is aerodynamically optimized for use with 28mm wide tires. Its tubeless design lets you run lower tire pressures for improved grip and rolling resistance without the risk of pinch flats. At the center of the 202 Firecrest is a durable and versatile new hub. The ZR1 DB hub offers greater bearing durability and quicker engagement with a Center Lock brake interface. - Tubeless compatibility ensures secure performance even when ridden at lower tire pressures - New Zipp graphics and cosmetic identity that screams speed - Aero, durable, and lightweight at classic 32mm rim depth - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 808 Firecrest Carbon Tubeless Rim Brake Rear
$1,949.00
Zipp's 808 Firecrest Tubeless rim-brake wheels make you faster with an 82mm rim depth that's fast, stable in crosswinds, and now tubeless ready. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance, without the risk of pinch flats. These wheels are infused with technologies developed in our Indianapolis advanced development lab—Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency, and Zipp's ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. At the center of the 808 Firecrest Tubeless rim-brake is a versatile and durable new hubset, the German-engineered ZR1. - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - ShowStopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - Tubeless technology ensures secure performance even when ridden at lower tire pressures - New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps and quick release skewers